第1步：以節能、舒適為基本原則。現在聽得最多的是“節能是一種社會責任”、“舒適是一種生活品質”，我們不管選擇什么產品，節能和舒適顯然成了提高生活品質的最基本標準。電采暖是前幾年一度流行的采暖方式，但因為電量消耗過大，還可能增加安全隱患，因此，節能舒適的采暖設備則成為了消費者最大的需求。一般情況下，水暖所采用的鍋爐多為“燃氣壁掛式鍋爐”，以外接室內溫控器，以實現個性化溫度調節和節能的目的。據統計，使用室內溫度控制器可以節能20～28%的燃氣費用。
Energy saving, comfort is the basic principle. Now hear the most is "Energy conservation is a social responsibility", "comfort is a quality of life," we do not care to choose what products, energy efficiency and comfort apparently become minimum standards to improve the quality of life. Electric heating was popular a few years ago heating method, but because power consumption is too large, it may increase security risks, therefore, saving and comfortable heating equipment has become the biggest consumer demand. Under normal circumstances, plumbing boiler used more as a "wall-mounted gas boiler," to an external room thermostat to adjust the temperature and personalized energy-saving purposes. According to statistics, the use of energy-efficient indoor temperature controller 20 to 28 percent of gas costs.
第2步：控制方便。一個良好的控制系統是鍋爐正常、安全燃燒運行的有效保證，并對檢測、維護、日常操作及故障分析等都具有重大意義。所以選擇一款高性能的鍋爐至關重要，特別是家里有老人和小孩，分房間控制溫度不僅能按自己的需求自由設定采暖溫度，還能在回家前就能提前設定溫度，一回家即可享受溫暖。
Easy to control. A good control system is the boiler properly, ensure safe and effective operation of combustion, and testing, maintenance, daily operation and fault analysis and so has great significance. So choose a high-performance boiler is essential, especially the elderly and children at home, not only to control the temperature of the room can be set freely according to their own needs heating temperature, but also to be able to go home early before the set temperature, a home to enjoy the warmth.
第3步：水溫恒定、水流量不變，水流量不變化，是衡量一個鍋爐是否具有高品質的首要標準。以前老式的生活熱水器，用水量忽大忽小，水溫時高時低。據介紹，現在鍋爐一改原來老式的只有一次熱交換，燃氣比例和水流量配合控制不能完全匹配，而如今的新式鍋爐，采用二次熱交換器，通過完全二次熱交換器，完全緩解燃氣與水流配合矛盾，水溫相當恒定，水流量不變化。消費者在選購鍋爐時，要切記水溫恒定這一標準。
Constant temperature, constant water flow, water flow does not change, is a measure of whether a boiler with a high-quality primary standards. The old life before the water heater, water suddenly suddenly small, low water temperature is high. According to reports, a change in the original old-fashioned boiler is now only one heat exchange, gas and water flow proportional control can not fully match fit, but now the new boiler, using secondary heat exchanger, through a secondary heat exchanger is fully complete remission gas and conflicts with water, a relatively constant temperature, water flow does not change. When consumers buy the boiler, the water temperature constant to remember this standard.
第4步：售后服務延續性對于消費者來說，在選購產品時，尤其是大件產品，售后服務是否完善是一個及其重要的因素。事實上，目前市場上很多的鍋爐品牌由于依靠在外貼牌生產及售后服務網絡不健全，售后服務難以得到保障。而專業的企業具有完善的服務網點和服務體系，不僅看企業的業績和規劃，更重點的是看企業的資歷和專業，每個環節都專業，才能保證整個流程銜接的高效、順暢。
Service continuity for consumers when purchasing products, especially large products, service is perfect and is an important factor. In fact, there are many brands on the market due to rely on external boiler OEM production and service network is not perfect, service is difficult to be guaranteed. And professional services companies with a sound network and service system, not just the business performance and planning, more emphasis is to look at business and professional qualifications, professional every link in order to ensure that the entire process of convergence efficient and smooth.
